Research Group Computed Tomography

[1] J. Kastner, B. Harrer, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa
[2] J. Kastner, D. Salaberger, B. Plank, High resolution X-ray computed tomography of fibre and particle filled polymers, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa
[3] J. Kastner, B. Plank, C. Kottler, V. Revol, Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa
[4] D. Salaberger, T. Koch, Y. Voronko, S. Seidler, J. Kastner, Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers, Proceedings POLYCHAR 2012, World Forum on Advanced Materials, 26-30. March 2012 Dubrovnik, Croatia
[5] J. Kastner, B. Plank, G. Requena, Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography, Materials characterization 64, 79-87 (2012)
[6] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl, Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM 31, No. 2, 1185-1194 (2012)
[7] C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer, Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL 99, 1-25 (2012)
[8] J. Kastner, B. Plank, D. Salaberger, K. Kannappan, Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. Proceeding FFH 2012, April 2012, Graz
[9] J. Kastner, B. Plank, C. Gusenbauer, B., G. Requena, 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie, Proceedings 7. Ranshofener Leichtmetalltage, 7.+8. Nov. 2012, Gmunden
[10] M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Heinzl, C. Gusenbauer, J. Kastner, Transmission based image quality optimisation for X-ray computed tomography, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[11] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller, Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[12] J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg, 3D Analysis of heterogenous and biogenic structures based on bone augmentation material, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[13] M. Jerabek, M. Reiter, H. Herbst; B. Plank, D. Salaberger, Z. Major, Characterization of Short Fiber Reinforced Polypropylene Composites, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[14] M. Tóth, G. Moser, C. Gusenbauer, Analysis of the middle ear mechanics with micro-CT, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[15] S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie, Correlation between hot ductility and damage in microalloyed steel slabs, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria (in print)
[15] B. Plank - Vom Granulat zum Spritzgussbauteil: Einfluss der Spritzgussprozesskette auf die Faserlängenverteilung bestimmt durch Röntgen- Computer-Tomografie. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Österreich, 2012, pp. 150
[17] G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol. 46, No. 4, 2012, pp. 19
[18] T. Koch, D. Salaberger, Methods for Characterizing the 3-D Morphology of Polymer Composites, MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124
[19] D. Salaberger, H. Scharleitner, J. Kastner, 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe von Röntgen-Mikro Computertomografie, DACH-Jahrestagung 2012, 17.-19. September 2012,  Graz/Austria (in print)
[20] H. Qureshi, M. Malik, M.A. Ahmad, C. Heinzl, Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data, 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, WSCG 2012, June 25-28, 2012, Pilsen, Czech Republic, pp. 8

 

[1] J. Kastner, B. Harrer, and H.-P. Degischer, High resolution cone beam x-ray computed tomography for 3D-microstructure characterization of Al-alloys, Materials characterization 62, 99-107 (2011)
[2] D. Salaberger, K.A. Kannappan, J. Kastner, J. Reussner, and T. Auinger, CT Data evaluation of fibre reinforced polymers to determine fibre length distribution, International Polymer Processing 3, 283-291 (2011)
[3] J. Kastner, R. Kickinger, and D. Salaberger, High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam, Journal of cellular plastics 47, 567-578 (2011)
[4] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, and E. M. Gröller, Projection-Based Metal-Artifact Reduction for 3DCT, IEEE Transactions on Visualization and Computer graphics 17, 2193 - 2202 (2011)
[5] M. Rodríguez-Hortalá, D. Salaberger, S. Hernández, M. Holzmeier, H.-P. Degischer, and J. Kastner, Mechanical and structural characterisation of defects in CFRP (carbon fibre reinforced polymer) materials, DGM-Symposium für Verbundwerkstoffe und Werkstoffverbunde, 30. March- 1. April 2011, Chemnitz/GE
[6] C.Heinzl, A.Amirkhanov, J.Kastner, E.Göller, M.Reiter, Fast estimation of optimal specimen placements in 3D X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE
[7] J. Kastner, D. Salaberger, and B. Plank, Phase contrast imaging with high resolution cone beam X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE
[8] M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, and J. Kastner, Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE
[9] B. Harrer, G. Requena, H.-P. Degischer, G. Xia, S. Ilie, and J. Kastner, 3D distribution of pores in continuously cast steel slabs investigated by multi-scale X-ray computed tomography, EUROMAT 2011, Sep. 2011, Montpellier/F
[10] C. Gierl, B. Harrer, H. Danninger, J. Kastner, R. Schneider, X-ray computed Tomography for Quantification of Secondary Pore Structures in PM Steels, International Conference on Deformation and Fracture in PM materials – DFPM 2011, 6–9. November, 2011, Stará Lesná, High Tatras, Slovakia
[11] J. Kastner, B. Harrer, R. Kickinger, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011
[12] J. Kastner, B. Plank, D. Salaberger, High resolution absorption and phase contrast computed tomography with a polychromatic X-ray source for materials characterization, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011
[13] B. Harrer and J. Kastner, Bookchapter: Cone Beam CT for non-destructive testing Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, X-ray Microtomography: characterisation of structures and defect analysis, Springer Verlag, Heidelberg, 119-150, 2011

[1] J. Kastner, B. Plank, D. Salaberger, J. Sekelja, Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography, 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany, 2010
[2] E. Heiss, D. Salaberger, Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl, JOURNAL OF ZOOLOGY, Vol. 280, No. 2, 2010, pp. 156-162
[3] G. Mayr, B. Plank, J. Sekelja, G. Hendorfer, Pulsed Thermography and Ultrasonic Testing for Non Destructive Testing of Porous Carbon Fiber Reinforced Polymers. NDT&E Int. 2010. (submitted)
[4] S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann, Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce wood, Trees Structure and Function.
[5] B. Chyba, M. Mantler, M. Reiter, Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography, Powder Diffraction Journal Vol. 25
[6] B. Plank, D. Salaberger, J. Kastner, High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, Germany, 2010, pp. 3
[7] C. Heinzl, M. Reiter, M. Allerstorfer, E. Gröller, J. Kastner, Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen, DGZfP Erfurt, Germany, 2010
[8] J. Kastner, B. Harrer, G. Requena, O. Brunke, A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys. NDT&E Int. 2010, Vol. 43, No. 10, 2010, pp. 599-605
[9] G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, 3D Microstructure Characterization of Wood Based Panels, Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Austria, 2010, pp. 6
[10] G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, Sub-micron-CT for the characterization of wood based panels, Journal "HOLZTECHNOLOGIE", Vol. 51, No. 4, 2010, pp. 44-49
[11] B. Plank, J. Kastner, J. Sekelja, D. Salaberger - Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 321-328
[12] D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer, Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability, Book of Abstracts: High Resolution X-ray CT Symposium, Dresden, Germany, 2010, pp. 37
[13] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner, Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
[14] B. Harrer, H.P. Degischer, J. Kastner, Microfocus computed x-ray tomography of segregations in high strength aluminium alloys, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
[15] J. Kastner, B. Harrer, V. Carl, H. Traxler, Computed tomography and pulsed thermography of carbon reinforced carbon/copper components for thermo-nuclear fusion. Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
[16] C. Heinzl, J. Kastner, E. Gröller, Uncertainty Visualization of Computed Tomography Datasets from Industrial Components using Statistical Analysis, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
[17] M. M. Malik, C. Heinzl, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 9999, No. 9999, 2010, pp. 8 
[18] J. Kastner, R. Kickinger, D. Salaberger, Structural analysis of polymeric foams by Sub-µm X-Ray computed tomography, CNDT 2010, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
[19] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger, CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution, PPS26-2010, Banff, Canada, Canada, 2010
[20] S. Müller, D. Salaberger, Analysis of a belt buckle from Mautern on a technical basis, Archaeology, Austria, Vol. 21, No. 1, 2010, pp. 60-65
[21] J. Kastner, B. Harrer, D. Salaberger, X-Ray Computed Tomography of materials for light-weight applications in Energyefficient Mobility, Shaker Verlag, 2010
[22] J. Kastner, Proceedings  Industrielle Computertomografie 2010, Wels, Austria, 2010
[23] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, C. Kuhn, J. Kastner, Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 163-173
[24] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, Method for the 3D characterisation of fibres in reinforced polymers, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 51-58
[25] M. Hochegger, B. Harrer, S. Ilie, H.P. Degischer, Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 93-100
[26] J. Crespo-Casanova, H.P. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer, In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 101-105
[27] M. Wurm, C. Hofer, H.  Traxler, A. Zabernig, B. Harrer, Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 133-139
[28] G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky, Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 65-70
[29] B. Plank, J. Sekelja, G. Mayr, J. Kastner, Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 25-34
[30] A. Amirkhanov, C. Heinzl, M. Reiter, E. Gröller, Visual Optimality and Stability Analysis of 3DCT Scan Positions, 21st IEEE Visualization Conference, Salt Lake City, Utah, USA, 24-29. October 2010
[31] J. Crespo-Casanova, H.P. Degischer, C. Landron, E. Maire, B. Harrer, K. Track, Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl, Tagung Werkstoffprüfung, Neu-Ulm, 2. - 3. Dez. 2010. (in print)
[32] M. Schöbel, V. Paffenholz, B. Harrer, M. Di Michiel, H.P. Degischer, 3D Characterization of Thermal Fatigue Damage in SiC Fiber Reinforced Copper, 13. Internationale Metallographie-Tagung, Leoben, 29. Sept. - 1. Okt. 2010 (in print)
[33] B. Harrer, J. Kastner, X-ray Microtomography, characterisation of structures and defect analysis, Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, Springer Verlag, Heidelberg, 2010, pp 32 (in print)

[1] G. Zauner, B. Harrer, Bildsegmentierung mittels Multiresolution - Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen. Vortrag: 3. Forschungsforums der österreichischen Fachhochschulen–FFH 2009, Villach, 15. - 16. April 2009. Tagungsband des 3. Forschungsforums. Fachhochschule Kärnten (ed.), 2009, 5 S.
[2] B. Plank, J. Kastner, R. Schneider, R. Busch - Characterisation of porosities in sinter-metalls by X-ray computed tomography - Example selective laser sintering - Proceedings DGZfP annual conference 2009, Münster, Germany, 2009, pp. 810-816
[3] M. Reiter, M.M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner, Improvement of X-ray image acquisition using a GPU based 3DCT simulation tool, SPIE Quality Control by Artificial Vision Wels, AUSTRIA, May 27-29, 2009
[4] B. Harrer, Detektierbarkeit von Heterogenitäten in Fe- Basis- und Aluminiumlegierungen mittels Röntgen-Computertomographie. Technische Universität Wien, Fakultät für Maschinenwesen und Betriebswissenschaften, Institut für Werkstoffwissenschaft und Werkstofftechnologie, Diss., Juli 2009, S. 1-229.
[5] B. Chyba, M. Mantler, M. Reiter, Monte-Carlo simulations for evaluation of different influences on projections in computed tomography, Denver X-Ray Conference 2009, Denver, United States of America, July 27-31, 2009
[6] G. Mayr, G. Hendorfer, B. Plank, J. Sekelja - Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models - American Institute of Physics Conference Proceedings, Kingston, United States of America, 2009, pp. 8
[7] D. Salaberger, B. Darmstädter, Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns, Conference on Interdisciplinary Musicology (CIM09), Paris, France, October 26-28, 2009
[8] C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Proceedings of Quality Control by Artificial Vision 2009, Wels, Austria, 2009, pp. 8
[9] M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proceedings of Quality Control by Artificial Vision 2009, Wels, Austria, 2009, pp. 998-999
[10] J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - Proceedings DGZfP annual conference 2009, Münster, Germany, 2009, pp. 8
[11] C. Heinzl, J. Kastner, E. Gröller - Computed tomography of multi-material components and evaluation using statistical analysis - Proceedings FFH 2009, Villach, Austria, 2009, pp. 8
[12] M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24
[13] C. Heinzl - Analysis and visualization of industrial CT data - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria, 2009, pp. 110
[14] M. Grabner, D. Salaberger, The need of high resolution, X-ray CT in dendrochronology and in wood identification, 6th International Symposium on Image and Signal Processing and Analysis, Salzburg, Austria, 2009, pp. 349-352

[1] C. Heinzl, J. Kastner, E. Gröller, Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion, Proceedings Industrielle  Computertomografie-tagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[2] B. Harrer, B. Plank, D. Moore, J. Kastner, H.P. Degischer, Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in metallischen Werkstoffen, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[3] D. Stifter, E. Breuer, M. Wurm, K. Wiesauer, E. Schlotthauer, J. Kastner, Optische Kohärenztomografie und Röntgen-Computertomografie für die Charakterisierung von Kunststoffmaterialsystemen, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[4] D. Salaberger, J. Kastner, Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[5] K. Ch. Schuster, D. Salaberger, J. Kastner, Computertomografie zur Visualisierung von Wasser auf Textilien, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[6] H. Traxler, B. Harrer, J. Kastner, Anwendung der Computertomografie auf Komponenten der Kernfusionstechnik, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008
[7] D. Salaberger, J. Kastner, Computertomografiemessungen an der Saliera und an Holzblasinstrumenten aus der Renaissance, Proceedings 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Austria, 25.+26. März 2008, Shaker Verlag, Aachen, 2008
[8] J. Kastner, F. Pfeifer, C. Heinzl und R. Freytag, Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten, DACH-Jahrestagung 2008 in St. Gallen, 28.-30. April 2008
[9] M. Reiter, S. Kunzmann, H. Lettenbauer, B.Chyba, M. Mantler, J. Kastner, Simulation eines industriellen 3D-Röntgen-Computertomographen zur verbesserten Geometriebestimmung, DACH-Jahrestagung 2008 in St. Gallen, 28.-30. April 2008
[10] J. Kastner, D. Salaberger, G. Zitzenbacher, W. Stadlbauer, R. Freytag, Determination of diameter, length and three-dimensional distribution of fibres in short glass-fibre reinforced injection moulded parts by µ-X-ray computed tomography, Proceedings Polymer processing society 24th annual meeting, 15.-19. June 2008, Salerno/I
[11] J. Kastner, F. Pfeifer and R. Freytag, Method for three-dimensional evaluation and visualisation of the distribution of fibres in glass-fibre reinforced injection moulded parts by µ-X-ray computed tomography, 17th World Congress on Non-destructive Testing, 25.-28. Oktober 2008, Shanghai/China
[12] B. Harrer, J. Kastner and H.-P. Degischer, Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography, 17th World Congress on Non-destructive Testing, 25.-28. Oktober 2008, Shanghai/China
[13] G. R.F. Mahr, C. Hinterhofer, H.  Haider, D. Salaberger, J. Kastner, K. Grösslinger and D. Lorinson,  Journal of the American Veterinary Medical Association, "Finite element modeling of the stabilization of a simple, not-dislocated fracture of the feline radius and ulna with an extramedullary interlocking nail"
[14] D. Schamall, M. Teschler-Nicola, T. Kohler, R. Müller, D. Salaberger, B. Patzak, J. Kastner, S. Tangl, Micro-Computed Tomography and Light-Microscopy in Historical Vertebrae: A Morphologic and Histomorphometric Analysis, American Journal of Physical Anthropologists
[15] D. Stifter, K. Wiesauer, M. Wurm, E. Schlotthauer, J. Kastner, M Pircher, E. Götzinger and C. K. Hitzenberger, Investigation of polymer and polymer/fibre composite materials with optical coherence tomography Measurement Science& Technology, special issue on Digital Holography and Optical Tomography
[16] B. Harrer, C. Gierl, H. Danninger, J. Kastner, R. Schneider, Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen, Werkstoffkolloquium FH-Campus Wels 2008, 28. Mai 2008
[17] M.Hochegger, B. Harrer, H.P. Degischer, Sergiu Ilie: Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen, 42. Metallographie-Tagung, Jena, 17.–19. September 2008
[18] M.Hochegger, J. Six, H.P. Degischer, Sergiu Ilie, B. Harrer: Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation, 3rd International Conference on Thermomechanical Processing of Steels, Padua, 10.-12. September 2008
[19] H. Traxler, B. Harrer, A. Zabernig, T. Friedrich, L.S. Sigl, J. Kastner, Computed Tomography of Components for Nuclear Fusion Experiments, Materials Science and Engineering, Nürnberg, 1. – 4. September 2008
[20] H. Traxler, S. Gerzoskovitz, L. Sigl, B. Harrer, J. Kastner, Pulsed Thermography of CFC Monoblock Divertor Components, 25th Symposion on Fusion Technology - SOFT 2008, Rostock, 15. – 19. September 2008
[21] M.Hochegger, B. Harrer, H.P. Degischer, S. Ilie, Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen, 42. Metallographie-Tagung, Jena, 17.–19. September 2008
[22] M. Reiter, H.Lettenbauer, J.Kastner, Simulation of an industrial x-ray cone beam computed-tomography system, IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, 22-24 September 2008
[23] C. Heinzl, J. Kastner, E. Gröller, Statistische Analyse von Multi-Material Bauteilen, Proceedings 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Austria, 25.+26. März 2008, Shaker Verlag, Aachen, 2008
[24] C. Heinzl, J. Kastner, E. Gröller, High Dynamic Range Imaging for Contrast Enhancement of X-Ray-Images, IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, 22-24 October 2008 Dresden, Germany
[25] C. Heinzl, J. Kastner, T. Möller, E. Gröller, Statistical analysis of Multi-Material Components using Dual Energy CT, VMV08, 08.-10.2008, Konstanz/Germany

[1] R. Engelke, G. Ahrens, N. Arndt-Staufenbiehl, S. Kopetz, K. Wiesauer, B. Löchel, H. Schröder, J. Kastner, A. Neyer, D. Stifter and G. Grützner, Investigations on possibilities of inline inspection of high aspect ratio microstructures, Microsystem Technologies Vol 13/3-4, 319-325, 2007
[2] J. Kastner, E. Schlotthauer, E. Breuer, K. Wiesauer und D. Stifter, Materialprüfung 4/2007, "Optische Kohärenztomografie und 3D-Röntgen-Computertomografie: Zwei Methoden zur zerstörungsfreien Materialprüfung und dimensionellen Messung", 2007
[3] J. Kastner, D. Salaberger, C. Heinzl, Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion, 229 PTB-Seminar, Geometriebestimmung mit industrieller Computertomografie, Braunschweig, 13.+14. März 2007, PTB-F-54, ISBN 978-3-86509-703-3
[4] J. Kastner, B. Harrer und D. Salaberger, Proceedings FHK F&E Forum, 11.-12.April 2007, "3D-Röntgen-Computertomografie für die zerstörungsfreie Werkstoffprüfung"
[5] J. Kastner, E. Schlotthauer, D. Angermaier, G. Zitzenbacher und W. Stadlbauer, Jahrestagung der DGZfP in Fürth, 14.-16.Mai 2007, "Quantitative Messung von Faserlängen und -verteilung in faserverstärkten Kunststoffteilen mittels µ-Röntgen-Computertomographie"
[6] B. Harrer, J. Kastner, A. Kottar, H.P. Degischer, Jahrestagung der DGZfP in Fürth, 14.-16. Mai 2007, "Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie"
[7] J. Kastner, D. Salaberger, M. Grabner, J. Reschreiter und M. Mehofer, Archäologie Österreichs, "MikroRöntgencomputer-tomografie: Eine zerstörungsfreie Methode für die Archäologie", (2007)
[8] Christoph Heinzl, Johann Kastner, Bernd Georgi and Hubert Lettenbauer, International Symposium on Digital industrial Radiology and Computed tomography, Lyon/France, 25.-27.June 2007, "Comparison of surface detection methods to evaluate cone beam computed tomography data for three dimensional metrology, Int. Symposium on Digital Industrial Radiology and Computed Tomography"
[9] J. Kastner, E. Schlotthauer, D. Angermaier, G. Zitzenbacher, Mikro- und Nano-Computertomografie für die dreidimensionale Charakterisierung von faserverstärkten Verbundwerkstoffen, ISM Sensorik 2007, Linz, 4. Okt. 2007
[10] G. Zauner, B. Harrer, D. Angermaier, M. Reiter and J. Kastner, Multiscale segementation method for small inclusion detection in 3D-industrial computed tomography, EOS Conference on trends in optoelectronics, Munich, 17.-19. June 2007
[11] B.Chyba, M.Mantler, M.Reiter, Monte-Carlo simulations of projections in computed tomography, Denver X-Ray Conference 2007, Denver, United States of America, 2007
[12] B. Harrer, W. Winkler, N. Lintner, A. Kottar, J. Kastner, H.P. Degischer, Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in metallischen Gussgefügen, DGM Metallographietagung, Sep. 07, Bremen.
[13] C. Heinzl, J. Kastner and E. Gröller, Surface extraction from multi-material components for metrology using dual energy CT,IEEE Transactions on Visualization and Computer graphics, Vol 13, 3, 1520-1528, 2007
[14] J. Kastner, D. Salaberger, Kyriacos Efstathiou, Röntgencomputertomografieuntersuchungen an metallischen Fundstücken aus Griechenland, Archäologie Österreichs 18/2, 64, 2007
[15] G. Windisch, D. Salaberger, W. Rosmarin, J. Kastner, G. U. Exner, V. Haldi- Brändle and F. Anderhuber, Journal of Orthopedic Research, "Clubfoot model based on Micro- CT data"
[16] K. Schicho, J. Kastner, R. Klingesberger, R. Seemann, G. Enislidis, G. Undt, F. Wanschitz, M. Figl, A.  Wagner, R. Ewers, Clinical Oral Implants Research, "Surface area analysis of dental implants using micro-CT", (2007).
[17] Griesser, G. Buchinger, T. Raab, D. P. Claassen, D. Meissner – Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography – Journal of Fuel Cell Science and Technology, Vol. 4, No. 1, 2007, pp. 84-87

[1] J. Kastner, D. Heim, D. Salaberger, Jahrestagung der ÖGZfP, Wien, 9.-10.März 2006, "Zerstörungsfreie Werkstoffprüfung mit Industrieller Computertomografie"
[2] J. Kastner, D. Heim, D. Salaberger, C. Sauerwein, and M. Simon, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, "Advanced applications of Computed Tomography by combination of different methods"
[3] C. Heinzl, J. Kastner and E. Gröller, European Conference on Non-Destructive Testing, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, "Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography"
[4] C. Heinzl, R. Klingesberger, J. Kastner and E. Gröller, Eurographics/IEEE-VGTC Symposium on Visualisation 2006, Lissabon, 8.-10.Mai 2006, “Robust Surface Detection for Variance Comparison"
[5] J. Kastner, B. Harrer und D. Salaberger, 4. Ranshofener Leichtmetalltage: Vom Werkstoff zum Bauteilsystem (LKR Verlag, 2006, S79-90), Salzburg, 17.-18.Okt. 2006, "Anwendungen der 3D-Röntgen-Computertomografie im Leichtmetallguss und im Leichtbau"
[6] B.Tomic, B.Harrer, A.Kottar, H.P. Degischer, L.Zeipper, J.Kastner, Berichte der 12.Internationalen Metallographie-Tagung, Leoben, Praktische Metallographie Sonderband 38 S113-120, 27.-29.Sept. 2006, “Charakterisierung der Graphitverteilung in Sphäroguss"
[7] M. Grabner, J. Kastner, A. Klein, H. Reschreiter and D. Salaberger, Proceedings Interpreted Iron Ages, 3.-5. Nov. 2006, Linz (2006), "Dendrochronologische Datierung von Holzgegenständen aus Hallstatt mit Hilfe von CT-Bildern"
[8] M.Reiter, G.Zauner, European Conference on Non-Destructive Testing, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, Poster: "Denoising of Computed Tomography Images using Multiresolution Based Methods"
[9] J. Kastner und B. Harrer, Deutsch – Österreichisches Symposium Optosensorik in der Produktion, OTTI Eigenverlag (2006), "Anwendungsbeispiele der Industriellen Computertomografie in der zerstörungsfreien Werkstoffprüfung"
[10] R. Engelke, G. Ahrens, R. Ruhmann, S. Kopetz, J. Kastner, K. Wiesauer, D. Stifter, B. Loechel, A. Neyer, G. Gruetzner, Springer Berlin/Heidelberg (2006), "Possibilities of Inline Process Inspection of High Aspect Ratio LIGA Micro Structures, HARMST 2005, Seoul Korea, Microsystem Technology"
[11] Schamall D, Teschler-Nicola M, Kohler T, Müller R, Salaberger D, Patzak B, Kastner J & Tangl St, 16th European Meeting of the Paleopathology Association, Santorin, 28. Aug.-1 Sept. 2006, Poster: "Histomorphometric Analysis of Historical Vertebrae by using Micro-Computed Tomography"
[12] Hinterhofer C., Ferguson J.C., Apprich V., Haider H., Kastner J., Stanek C., 14th International Symposium on Lameness in Ruminants, Colonia (Uruguay), 8.-11. Nov. 2006, "A finite element model of the full bovine digit"

[1] J. Kastner, E. Schlotthauer, D. Salaberger, M. Simon und C. Sauerwein, Jahrestagung der DGZfP, Rostock, 2.-4.Mai 2005, "Mikro-Computertomographie für die Charakterisierung und Vermessung von Mikrobauteilen"
[2] S. Griesser, G. Buchinger, T. Raab und D. Meissner, Jahrestagung der DGZfP, Rostock, 2.-4.Mai 2005, "Charakterisierung von Brennstoffzellen und Brenn-stoffzellensystemen mit Computertomographie"

[1] J. Kastner, E. Schlotthauer, P. Burgholzer und D. Stifter, Proceedings DACH Jahrestagung, Salzburg, 17.-19.Mai 2004, "Vergleich von optischer Kohärenztomographie und Computertomographie für die Charakterisierung von faserverstärkten Kunststoffen"
[2] J.Kastner, E. Schlotthauer, P. Burgholzer und D. Stifter, 16th World Conference on Nondestructive Testing, Montreal (Canada), 30.Aug.-30.Sept. 2004, "Comparison of x-ray computed tomography and optical coherence tomography for characterization of glass-fibre polymer matrix composites"